Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 182
Original/Paper Setup, Custom Original Size Setup
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
System Menu Original/Paper Setup Register additional types and sizes of originals and paper. Custom Original Size Setup Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select original size. The dimensions available are as follows. The table below lists the sizes that can be registered. Input units Inch models Metric models Dimensions X: 2 to 17" (in 0.01" increments) Y: 2 to 11.69" (in 0.01" increments) X: 50 to 432 mm (in 1 mm increments) Y: 50 to 297 mm (in 1 mm increments) Up to four custom original sizes can be added. Use the procedure below to select the interface. 1 Press the System Menu key. 2 Press [Common Settings], [Next] of Original/Paper Setup and then [Next] of Custom Original Size. 3 Press [Change] of any one of Custom 1 to Custom 4, on which you wish to register the size. 4 Press [On], and then press [+], [-] or numeric keys to enter X (horizontal) and Y (vertical) dimensions. Common Settings - Custom 1 Register a custom original size. Off X(2.00 - 17.00) 17.00 " On # Keys Y(2.00 - 11.69) " 11.69 # Keys Status Paper is remaining in Document Processor. Cancel OK 10/5/2006 10:10 5 Press [OK]. Adding a Custom Size and Media Type for Paper to Print Set up a maximum of four frequently-used custom paper sizes. The custom size options are displayed on the screen to select paper set in the Multi Purpose tray. 6-6 ADVANCED OPERATION GUIDE