Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 13
Connecting to the Network, FieryX3e on the network
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
11-1 Fiery X3e on the network Chapter 1: Connecting to the Network This chapter summarizes the stages in setting up the Fiery X3e, and includes diagrams that refer you to other chapters or other manuals for completing your installation. Check those references to find the information you need quickly. Fiery X3e on the network When the Fiery X3e is connected to a network, it behaves as a networked PostScript printer. The built-in Ethernet interface on the Fiery X3e supports the following network protocols: • AppleTalk • TCP/IP (the lpd, nbt, and http protocols) TCP/IP stands for Transmission Control Protocol/Internet Protocol. The lpd protocol is the standard TCP/IP printing protocol. The nbt protocol supports Windows (SMB) printing. The port 9100 is the printer server port number to publish print connections between the print server and a remote computer. The http protocol is commonly used for Web pages on the Internet and on intranets. The http protocol also supports IPP printing. • IPX/SPX (Novell) IPX/SPX stands for Internetwork Packet Exchange/Sequenced Packet Exchange. These protocols (rules that enable computers on a network to communicate with each other) are supported on Mac OS, Windows, and UNIX platforms and can run concurrently on the same cable. Workstations that use other protocols can print through a server that uses one of the protocols mentioned. When you add the Fiery X3e to a network, it is assumed that a network administrator has already installed a network cabling system and connected workstations and servers.