Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 38
Configuring a NetWare 5.x server for printing
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
22-14 Setting up Network Servers Configuring a NetWare 5.x server for printing Before you begin The following procedure assumes NDPS has been installed during NetWare 5.x installation and that a Broker is running on the server. Unless you have manually unloaded the Broker, it loads and runs when you install NDPS. Make sure you are using the latest NetWare 5.x service pack and Novell gateway. Finally, create an NDPS Manager. For more information, see your NetWare documentation. In Fiery X3e Setup, make sure you have enabled TCP/IP (page 4-11) and LPD printing (page 4-17) on the Fiery X3e. You can ping the Fiery X3e (page 2-18) to verify that TCP/IP communication is successful. Setting up the Fiery X3e printer driver You first need to create a directory for Windows NT 4.0/2000/XP or a folder for Windows 9x/Me in the NetWare server for NDPS to install the corresponding printer driver files from the User Software CD. TO SET UP THE PRINTER DRIVER FOR WINDOWS NT 4.0/2000/XP 1. Log on to the Novell file server as a superuser or Administrator. 2. In the SYS:ndps\resdir\Prndrv\NT4/2000/XP directory, create a directory called Fiery. 3. From the User Software CD, copy the contents of the ENGLISH\INSTALRS\PS_DRVR\WIN_NT/2000/XP folder to the Fiery directory. TO SET UP THE PRINTER DRIVER FOR WINDOWS 9X/ME 1. Log on to the Novell file server as a superuser or Administrator. 2. In the SYS:ndps\resdir\Prndrv\Win9x/Me directory, create a folder called Fiery. 3. From the User Software CD, copy the contents of the ENGLISH\INSTALRS\PS_DRVR\WIN_9x/Me folder to the Fiery directory.