Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 63
Port Setup options, Auto Detect/100 Mbps/10 Mbps [Auto Detect]
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
44-9 Network Setup options 8. When you have finished entering protocol settings, choose Exit Protocol Setup, and then choose Service Setup. 9. Enter the appropriate settings for the services you will use. The options are described in detail in the following pages. TO EXIT NETWORK SETUP 1. When you have finished entering service settings, choose Exit Network Setup. 2. Choose Yes when prompted to save changes. 3. From the main Setup menu, choose another Setup or choose Exit Setup. Network Setup Port Setup Port Setup options You can enable Ethernet and parallel communication simultaneously. To configure the Fiery X3e, choose each port type you use and enter the settings for that port. Since network setups are nested, the names of higher-level menus are shown in this chapter to the left of each menu heading. Ethernet Setup Enable Ethernet Yes/No [Yes] Select Yes if you have Ethernet cabling connected to the Fiery X3e. Ethernet Speed Auto Detect/100 Mbps/10 Mbps [Auto Detect] Select Auto Detect if your network environment is mixed or if you do not know the network speed. If you know the speed of the network to which the Fiery X3e is attached (10 Mbps or 100 Mbps), select it.