Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 98
PrintMe Setup options
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
44-44 Performing Setup from the Control Panel PrintMe Setup options PrintMe allows users to access and print their e-mail messages, Internet content, and other documents anytime, anywhere, from any device, to the Fiery X3e. NOTE: Jobs sent with a PrintMe account are only sent through the Fiery X3e Direct connection. For more information about PrintMe, go to www.printme.com. TO ACCESS PRINTME SETUP OPTIONS 1. In the main Setup menu, choose PrintMe Setup. 2. Enter the options appropriate to the printing requirements at the site. 3. When you have finished, save changes. In the following list of options, default values, where applicable, appear in square brackets. Enable PrintMe Yes/No [No] To enable PrintMe, you must first set up DNS. For information on DNS Setup, see page 4-14. Select Yes to enable PrintMe, select Save, and exit Setup. The Fiery X3e restarts and acquires the 16-digit activation code required to proceed with PrintMe Setup. Immediately after the Fiery X3e restarts, a PrintMe activation page is printed with the Fiery X3e PrintMe activation code. From any web enabled computer, go to www.printme.com and click Activate Stations. Enter the 16-digit activation code that was printed on the PrintMe confirmation page. NOTE: We highly recommend that you enter your PrintMe activation code within an hour from the time it is printed. Your activation code may become invalid if you try to enter your code after this time elapses. If this happens, you must disable PrintMe in Setup, allow the Fiery X3e to restart, and go through PrintMe Setup again to get a valid activation code.