Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 42
Type the Fiery X3e IP address assigned in Fiery X3e Network Setup., To access Fiery X3e Setup, see
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
22-18 Setting up Network Servers TO SET UP FIERY X3E PRINTING ON UNIX SYSTEMS 1. Specify the appropriate settings in Fiery X3e Server Setup. To access Fiery X3e Setup, see page 4-3. 2. Specify the appropriate settings in Fiery X3e Network Setup. Enter a valid IP address, subnet mask, and gateway address for the Fiery X3e. 3. Specify the appropriate settings in Fiery X3e Printer Setup. Publish the Print queue and/or Hold queue. TO SET UP TCP/IP FOR COMMUNICATION WITH THE FIERY X3E 1. A superuser (with root login) must add the Fiery X3e to the network's IP host table or other system database of network printers. 2. In the file or utility used by your network, specify the remote printer name, the print server protocol, the queue, and the spool file for the Fiery X3e name you assigned. 3. Make the Fiery X3e available as a printer to other network users. 4. To verify the TCP/IP connection, ping the IP address or the host name. From any computer on the network, at the command prompt, type: ping Type the Fiery X3e IP address assigned in Fiery X3e Network Setup. After the Fiery X3e is set up as a network printer, you can also ping the name you gave to the Fiery X3e: ping The server should respond with a message such as: Reply from ... Some systems will respond with a continuous display of output from the IP address. To stop the output, type Control-C. You can use the ping command at any time.