Kyocera KM-C2030 Fiery X3e Configuration Guide for Ver 2.0 - Page 62
Choose Port Setup from the Network Setup menu
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
44-8 Performing Setup from the Control Panel For this Network or Connection Type AppleTalk over Ethernet TCP/IP over Ethernet IPX/SPX over Ethernet Parallel The available network types, and the Setup areas that pertain to them, are summarized in the following table. Use this Port Setup Ethernet Setup Ethernet Setup Ethernet Setup Parallel Port Setup Use this Protocol Setup AppleTalk Setup TCP/IP Setup: Ethernet Setup IPX/SPX Setup - Use this Service Setup AppleTalk printing (PAP) is enabled automatically. LPD Setup Web Services Setup Windows Setup Port 9100 Setup IPP Setup (Windows 9x/Me/2000/XP) PServer Setup (NDS, Bindery, or both) - TO ACCESS NETWORK SETUP OPTIONS 1. Confirm that the network cable is connected to the Fiery X3e. During Network Setup, the Fiery X3e queries the network for zones, servers, and server-based queues. If you perform Network Setup without a connected and functioning network, default settings are used that may not meet your needs. 2. Choose Network Setup from the main Setup menu. 3. Choose Port Setup from the Network Setup menu. 4. To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings. 5. To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and enter the appropriate settings. 6. When you have finished entering port settings, choose Exit Port Setup, and then choose Protocol Setup. 7. Enter the appropriate settings for the protocol or protocols you will use.