Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 137

Copying Functions Margin/Centering Mode Shift the original image to make space on the copy for binding on the left (right) or top (bottom) side. When you copy onto paper different from the original size, you can center the original image on the paper. The following margin widths are available. Input units Margin Width Inch Models -0.75 to 0.75" (in 0.01" increments) 4 Metric Models -18 mm to 18 mm (in 1-mm increments) Margin on the Back Side When duplex copying, you can also specify the margin on the back side. Auto When [Auto] is selected, an appropriate margin is applied automatically on the rear page depending on a margin specified for the front page and a binding orientation. Separate Front/Back Margins Enables you to specify the front and back settings separately. NOTE: You can set the default margin width. Refer to Margin Default on page 8-21 for details. Use the procedure below to make copies with margins. 1 Press the Copy key. 2 Place the originals on the platen. 3 Press [Layout/Edit] and then [Margin/Centering]. Ready to copy. Margin/Centering Off Place original. Margin Centering Original Zoom Paper : --- : 100% : --- Preview Status Add Shortcut Copies Left/Right (-18 - +18) 0" # Keys Top/Bottom (-0.75 - +0.75) 0" # Keys Cancel Auto Back Page Top Edge Top Original Orientation OK 08/08/2009 10:10 4 Press [Margin] to select the copy with margin. Use [+] or [-] to enter the margins for Left/Right and Top/Bottom. Press [# Keys] to use the numeric keys for entry. For duplex copying, press [Back Page] and select [Auto] or [Manual]. OPERATION GUIDE 4-15