Miele DGC 6700 AM Operating instructions/Installation instructions - Page 143

Sensor lock, Water hardness, Showroom program, Demo mode

Page 143 highlights

Settings Sensor lock The sensor lock prevents a cooking process from being switched off or changed while it is running. Once activated, the sensors are locked a few seconds after a program has started. - On The sensor lock is active. Press the  symbol for at least 6 seconds to use the sensors again. The sensor lock is then deactivated for a short period. - Off The sensor lock is deactivated. All sensors react to touch as normal. Water hardness The steam oven is factory set for Hard water. It must be adjusted local water hardness to ensure trouble-free operation and to ensure that descaling is carried out at the correct interval. The harder the water, the more often it will need to be descaled. - Soft < 8.7 °gr/gal, < 1.5 mmol/l - Medium 8.7 - 14.6 °gr/gal, 1.5 - 2.5 mmol/l - Hard > 14.6 °gr/gal, > 2.5 mmol/l Showroom program This mode enables the oven to be demonstrated in showrooms without heating up. It should not be set for domestic use. Demo mode If demo mode is activated Demo Mode active. The appliance will not heat up will appear when the steam oven is turned on. - On Press OK for at least 4 seconds to activate demo mode. - Off Press OK for at least 4 seconds to deactivate demo mode. The steam oven can then be used as normal. 143

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184

Settings
143
Sensor lock
The sensor lock prevents a cooking
process from being switched off or
changed while it is running. Once acti-
vated, the sensors are locked a few
seconds after a program has started.
On
The sensor lock is active. Press the
 symbol for at least 6 seconds to
use the sensors again. The sensor
lock is then deactivated for a short
period.
Off
The sensor lock is deactivated. All
sensors react to touch as normal.
Water hardness
The steam oven is factory set for
Hard
water. It must be adjusted local water
hardness to ensure trouble-free opera-
tion and to ensure that descaling is car-
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
Soft
<
 8.7 °gr/gal,
<
 1.5 mmol/l
Medium
8.7 - 14.6 °gr/gal, 1.5 - 2.5 mmol/l
Hard
>
 14.6 °gr/gal,
>
 2.5 mmol/l
Showroom program
This mode enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for do-
mestic use.
Demo mode
If demo mode is activated
Demo Mode
active. The appliance will not heat up
will
appear when the steam oven is turned
on.
On
Press OK for at least 4 seconds to
activate demo mode.
Off
Press OK for at least 4 seconds to
deactivate demo mode. The steam
oven can then be used as normal.