Nokia 7710 User Guide - Page 113
Security, Device lock, PIN codes
View all Nokia 7710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Control panel Security Go to Desk > Control panel > Security. Here you can define the phone security level of your smartphone. Codes are shown as asterisks. If you are changing a code, you will be prompted for the current code and then the new code twice. For more information on access codes, see "Access codes" on page 24. Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency number. Device lock Autolock period: - You can set an autolock period, a timeout after which the smartphone is automatically locked and can be used only if the correct lock code is entered. Note: When the device is locked, calls still may be possible to the official emergency number programmed into your device. Lock code: - The lock code must be from five to ten digits long. The factory setting for the lock code is 12345. To avoid unauthorised use of your smartphone, change the lock code. Keep the new code secret and in a safe place separate from your smartphone. Lock if SIM card changed: - You can set the smartphone to ask for the lock code when an unknown, new SIM card is inserted into your smartphone. The smartphone maintains a list of SIM cards that are recognised as the owner's cards. PIN codes PIN code request: - When active, the code is requested each time the smartphone is switched on. Deactivating the PIN code request may not be allowed by some SIM cards. If you enter the PIN code incorrectly three times in succession, you will need a PUK (PIN Unblocking Key) code to unblock the SIM card. When the SIM card is blocked, you can only make calls to preprogrammed emergency numbers. Otherwise, you cannot use the smartphone before you enter the appropriate codes. Note that this setting cannot be changed, if the phone is switched off or if there is no valid SIM card inserted. Note also that some SIM cards do not allow you to turn the PIN code request off. Confirm SIM services: (network service) - To set the smartphone to display confirmation messages when you are using a SIM card service. PIN code: - The PIN code must be from 4 to 8 digits long. PIN2 code: -The PIN2 code must be from 4 to 8 digits long. The PIN2 code is required to access some functions, such as the call cost settings, which must be supported by your SIM card. If you enter an incorrect PIN2 code three times in succession, you will need a PUK2 code to unblock the 113 Copyright © 2005 Nokia. All rights reserved.