Panasonic 26PEK2U6 26PEK2U6 Service Manual - Page 183

6-62. Final Procedure Reinstall the removed part to be placed in its original position. (See the section "6-57. Preparation Before Installation".) Then install the accessory supplied side covers (L/R) on both sides of the indoor unit. Attach the supplied side plates. Insert the side plates in the direction of the arrow and fix them with 2 screws once you've removed. Side plate Screw Attach Attach the accessory supplied side covers. Slide the covers from the front side and attach to the claws of the latches. Tighten the screws (accessory supplied). Side cover (accessory supplied) 1. Specifications 6-63. Accessories Supplied with Unit (Ceiling) Part Name Figure Q'ty Remarks Special washer For temporarily 4 suspending indoor unit from ceiling Drain insulator 2 For drain hose joint Flare insulator 1 For gas tube joint 1 For liquid tube joint Clamper Clamper Hose band 4 For flare insulator 1 For wiring 1 For drain hose connection Screw 2 For side cover (L/R) Part Name Figure Q'ty Remarks 1 Side cover (R) 1 (Packed in carton box) For right side Side cover (L) 1 (Packed in carton box) For left side Full-scale installation diagram 1 For positioning installation Screw (accessory supplied) Fig. 1-205 Attach the air-intake grille. When attaching the air-intake grille, perform the reverse procedure to removing the grille. Refer to the section "6-57. Preparation Before Installation". Be sure to attach the safety string. Close the air-intake grille and fix the claws of the latches with the screws. Safety string  Part Name Wire cover Figure Q'ty Remarks 1 For control box Screw 1 For wire cover Part Name Operating Instructions Installation Instructions Warranty card Figure Q'ty Remarks 1 1 1 Use 3/8" (M10) for suspension bolts. Field supply for suspension bolts and nuts. Fig. 1-206 1-175