Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 114

External monitor You can connect this unit to an external monitor as shown in the figure below.  SDI OUT AUDIO OUT VIDEO OUT     A HDMI Cable (optional) B BNC Cable (commercially-available) C Audio cable (commercially-available) 3.5 mm (0.14 q) diameter jack to RCA cable D External monitor ≥ By connecting this unit to a 4K-compatible external monitor with HDMI Cable and play back scenes recorded with their size set to 4K (4096k2160) or UHD (3840k2160) in [REC FORMAT], you can enjoy finely-detailed 4K motion pictures. For an external monitor that does not support 4K motion picture, you can change the [RESOLUTION] or [HDMI UHD OUTPUT LIMIT] setting so that 4K motion pictures can be played back at a lower resolution. ≥ If you set [REC FORMAT] to [UHD 2160/59.94p 150M] or [UHD 2160/50.00p 150M] in Recording Mode and then connect this unit to a 4K-compatible external monitor with an HDMI cable, images will be output in 3840k2160 when recording is stopped and in 1920k1080 during recording or PRE-REC. Please note that the image on the screen of this unit and on the external monitor disappears for a few seconds every time you start or stop recording or every time you switch the PRE-REC on/off. These irregularities do not occur when [RESOLUTION] is set to [1080p] or [1080i], which outputs images in 1920k1080. When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the connector of this unit last. Connecting the HDMI cable to the connector of this unit first may result in malfunction. ≥ This unit is not compatible with the VIERA Link. ≥ Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m (9.84 feet) or less. ≥ Use a commercially-available, double-shielded BNC cable equivalent to 5C-FB. - 114 -