Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 72
Setting the User Information, TC PRESET]
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
[TC PRESET] You can set the initial time code. 1 Select the menu. MENU : [RECORD SETUP] # [TC PRESET] 2 Touch the item to set and change with / . ≥ It will be set to 00h00m00s00f when the RESET/TC SET button is pressed. ≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame. 3 Touch [EXIT] to complete the setting. ≥ This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT] (l 142) or [OUTPUT FORMAT] (l 147). Therefore, it may not be continuous from the previous final time code when the recording format is changed. ≥ If the frame rate in [REC FORMAT] or [OUTPUT FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple of 4. If you enter a different value, time code will not be recorded correctly. Setting the User Information Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, control numbers, etc., into the User Information. UB 00 00 00 00 ≥ This is displayed only when [REC MODE] is set to [AVCHD]. (l 141) [UB PRESET] You can set the User Information. ≥ Set [REC MODE] to [AVCHD]. (l 141) 1 Select the menu. MENU : [RECORD SETUP] # [UB PRESET] 2 Touch the item to set and change with / . ≥ You can use numbers from 0 to 9 and letters from A to F. ≥ It will be set to 00 00 00 00 when the RESET/TC SET button is pressed. 3 Touch [EXIT] to complete the setting. - 72 -