Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 192

Problem When connected by the USB Cable, this unit is not detected by the PC. When the USB Cable is disconnected, an error message will appear on the PC. With a PC Check points ≥ After re-inserting the SD card into the unit, reconnect the USB Cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 121) ≥ Connect the USB Cable again after restarting the PC and turning on this unit again. ≥ To disconnect the USB Cable safely, double-click the icon in the task tray and follow the instructions on the screen. Problem If the SD card is inserted in this unit, it is not recognized. Others Check points ≥ If the SD card is formatted on a PC, it may not be recognized by this unit. Use this unit to format SD cards. (l 32) ∫ If AVCHD scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another device. ≥ Just how smoothly the scenes will be played back depends on the playback device. Depending on the device used, the images may stop moving and become still for a moment even when none of the following conditions are applicable. ≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device. Principal reasons for not playing back smoothly ≥ The recording format [PS] was switched to another recording format when a scene was recorded ≥ When the scenes were recorded on different dates ≥ When scenes lasting under 3 seconds have been recorded ≥ When PRE-REC was used for recording ≥ When the Interval Recording is used ≥ When deleting scenes ≥ When scenes recorded more than 99 scenes on the same date - 192 -