Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 134

[KNEE APE LEVEL] This sets the detail level of high luminosity areas (extremely bright areas). 1 Touch [KNEE APE LEVEL]. 2 Touch the desired setting item. [0]/[1]/[2]/[3]/[4]/[5] 3 Touch [EXIT] to exit the menu screen. [RB GAIN CONTROL SETTING] This adjusts the color balance for each position of the WHITE BAL switch. You can also set whether or not to apply the color balance settings to Auto White Balance/Auto Black Balance. ≥ These settings do not work when the White Balance mode is set to [ATW]. 1 Touch [RB GAIN CONTROL SETTING], and select the desired item. [AWB PRE]: [AWB A]: [AWB B]: Setting for the PRST position of the WHITE BAL switch Setting for the A position of the WHITE BAL switch Setting for the B position of the WHITE BAL switch 2 Touch the desired setting item. [R GAIN]: Adjusts the intensity of red. [B GAIN]: Adjusts the intensity of blue. [GAIN OFFSET]*: Sets whether to maintain or reset the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto Black Balance is used. * Displayed only if you touch [AWB A] or [AWB B] in Step 1. 3 (If you have touched [R GAIN]/[B GAIN] in Step 2) Touch / to adjust the color balance. ≥ You can select a value between s30 and r30. ≥ Touch [RETURN]. (If you have touched [GAIN OFFSET] in Step 2) Touch [ON] or [OFF]. [ON]: Maintains the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto Black Balance is used. [OFF]: Resets the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto Black Balance is used. ≥ To make additional changes, repeat Steps 2s3. 4 Touch [EXIT] to exit the menu screen. ≥ The default settings that are assigned to [SCENE1] in [CUSTOMIZE SCENE] are as follows: j [R GAIN]: "0" j [B GAIN]: "0" j [GAIN OFFSET]: [OFF] - 134 -