Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 159
Recording Setup, Relay recording, MEDIA SELECT], 2 SLOTS FUNC.]
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Recording Setup All default settings are indicated with underlined text. MENU : [RECORD SETUP] # desired setting [MEDIA SELECT] ≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31) [SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still pictures. (l 32) [2 SLOTS FUNC.] You can set relay/simultaneous/background/dual codec recording. ≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31) ≥ Insert SD cards to card slot 1 and card slot 2. [OFF]: [RELAY REC]*1: [SIMULTANEOUS]*2: Cancel the setting. Set the relay recording Set the simultaneous recording [BACKGROUND]*1, 3: [DUAL CODEC]*1, 2, 4: Set the background recording Set the dual codec recording *1 This function is not available in the following cases: j In Variable Frame Rate Mode (l 91) j During the Interval Recording (l 162) *2 This item is not available when different types of SD cards (SDHC Memory Card/SDXC Memory Card) are used. *3 This function is not available in the following cases: j When [REC FORMAT] is set to a setting with a size of 4K (4096k2160) or UHD (3840k2160) (l 142) j When the bit rate of [REC FORMAT] is above 50 Mbps *4 Set [REC FORMAT] to a setting that allows you to use dual codec recording. (l 162) ∫ Relay recording This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording. ≥ RELAY is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 32). When the recording media is switched and Relay Recording starts, RELAY will disappear from the location and instead be displayed beside the other SD card display. ≥ Even after switching of the recording media, you can replace the SD card that ran out of space with a new one and record the motion picture onto three or more SD cards. Since it may take a while for this unit to recognize a new SD card, replace the SD card that ran out of space when the SD card currently being used as a destination still has sufficient remaining recordable time. - 159 -