Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 2
Read this first - 4k
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Read this first ∫ About the recording method for recording motion pictures This unit can record motion pictures using three different recording methods, including MOV, MP4 and AVCHD*. (l 33, 141) * AVCHD Progressive (1080/60p, 1080/50p) supported. MOV and MP4: These recording methods are suitable for editing images. Audio is recorded in linear PCM. ≥ Those methods are not compatible with motion pictures recorded in AVCHD format. ≥ Those methods can record motion pictures in formats that support 4K. 4K motion pictures offer a resolution four times higher than that of full high-definition motion pictures. AVCHD: This recording method is suitable for playback on a high-definition compatible external monitor. Audio is recorded in Dolby® Digital. ∫ Regarding system frequencies The NTSC/PAL region setting can be switched in [SYSTEM FREQ]. (l 141, 178) ≥ You cannot store AVCHD scenes recorded with different system frequencies on the same SD card. If you have switched the system frequency, use another SD card. ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. ∫ About Condensation (When the lens, the viewfinder or LCD Monitor is fogged up) Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged. When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.) When condensation has occurred, remove the battery and/or the AC adaptor and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. - 2 -