Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 186
Cannot Use Sd Card, Control Data Error
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Display Description Behavior and cause ERROR - UNABLE TO REPAIR DATA. This is displayed when the management information cannot be recovered. ≥ Check the SD card. CANNOT USE SD CARD IN VIDEO MODE, CONTROL DATA ERROR. This is displayed when the management information cannot be recovered. ≥ The operation will stop. ≥ Use another SD card to perform recording. CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) Defective management information has been found. ≥ The management information will be automatically recovered after this message is displayed. VFR ON, NO AUDIO RECORDING Audio cannot be recorded if you change the frame rate when using Variable Frame Rate Mode. ≥ To record audio, disable Variable Frame Rate Mode. CANNOT REC Recording cannot be performed with this unit when [OUTPUT BITS] is set to [4:2:2(10bit)]. ≥ To perform recording with this unit, set [OUTPUT BITS] to [4:2:2(8bit)]. CANNOT PLAY. This is displayed when an error in the recording folder name or file name has occurred, for example. ≥ Check the SD card. - 186 -