Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 45

∫ To change the way you adjust focus with the focus ring Select the menu. MENU : [SW SETUP] # [FOCUS RING DRIVE] [SPEED]: [COARSE]: [FINE]: Adjusts the focus value according to the speed at which the focus ring is rotated. Adjusts the focus value according to the rotational position of the focus ring. Since the operation of the focus ring results in a greater change in focus value, this setting is suitable for making rough adjustments. Adjusts the focus value according to the rotational position of the focus ring. Since the operation of the focus ring results in a smaller change in focus value, this setting is suitable for making fine adjustments. ∫ To emphasize the outline of images Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of an image displayed on the LCD monitor and viewfinder. You can also adjust the emphasis level or change the frequency. ≥ You can also enable or disable this function with the applicable USER button. (l 83) ≥ These settings will not affect the images actually recorded. MENU : [DISP SETUP] # [EVF/LCD DETAIL] # [ON] Adjusting the level of [EVF/LCD DETAIL] 1 Select the menu. MENU : [DISP SETUP] # [EVF/LCD PEAK LEVEL] 2 Touch / to adjust settings. ≥ You can select a value between s3 and r3. 3 Touch [EXIT] to complete the setting. Setting the peaking frequency of [EVF/LCD DETAIL] Select the menu. MENU : [DISP SETUP] # [EVF/LCD PEAK FREQ.] # [HIGH] or [LOW] ≥ [EVF/LCD DETAIL] is canceled in following cases: j If you use Focus Assist (l 48) - 45 -