Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 50
Touch, to adjust settings., Touch [EXIT] to complete the setting., SW SETUP], PEAKING LEVEL]
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
MENU : [SW SETUP] # [PEAKING LEVEL] # desired setting 2 Touch / to adjust settings. ≥ You can select a value between s7 and r7. 3 Touch [EXIT] to complete the setting. (Notes on Focus Assist) ≥ Focus Assist is not possible in following cases: j During Recording Check (l 80) j During Freeze Frame (l 81) j When color bars are displayed. (l 95) ≥ Focus Assist is canceled in following cases: j If you turn the unit off j If you press the THUMBNAIL button j When the setting of [FOCUS ASSIST] (l 48) is changed j When EVF/LCD detail is enabled. (l 45) j When you set this unit to Auto Focus j When you press the USER button to which [FOCUS TRANSITION] is registered or touch the applicable USER button icon (l 53) j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 122) ≥ The magnified display and peaking are not displayed on recorded images. ≥ The magnified display and peaking are not displayed on an external monitor. ≥ Freeze Frame is not available when you use Focus Assist. (l 81) ≥ Peaking may not be displayed when you use Digital Zoom (l 79). To zoom in and use peaking at the same time, we recommend setting [FOCUS ASSIST] to [BOTH] and increasing the magnification level of the magnified display. (Notes on the magnified display of Focus Assist) ≥ Some information on the screen disappears when the screen is magnified. ≥ Still pictures cannot be recorded when the screen is magnified. ≥ In the following cases, the screen is not magnified during Focus Assist: j During motion picture recording or PRE-REC (l 86, 163) j When using Digital Zoom j When using Area Mode (l 82) j During auto recording (l 90) j In Variable Frame Rate Mode (l 91) ≥ If you set the magnification level of the magnified display to 5.5k or higher, peaking may not be displayed when using i.Zoom (l 41). - 50 -