Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 14

∫ Attaching the front microphone ≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G: optional) can be attached. Check in advance whether the microphone you wish to use can be attached. 1 Attach the microphone holder to the microphone holder attachment part. ≥ Attach by using a commercially available screw driver. ≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you might hear a squeaking sound.   A Microphone holder attachment part B Microphone holder C Microphone holder mounting screws  2 Attach an external microphone (optional) to the microphone holder, and tighten the microphone holder screw. 3 Connect the external microphone to the AUDIO INPUT1 terminal (XLR 3 pin). ≥ When wiring the microphone cable, use the cable clamper of this unit. ≥ Keep the microphone holder screw, zoom ring pin and INPUT terminal cap out of reach of children to prevent swallowing.    D AUDIO INPUT1 terminal (XLR 3 pin) E Microphone cable clamper F Microphone holder screw G External microphone (optional) ∫ Attaching the INPUT terminal cap Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.  A INPUT terminal cap ∫ Attaching the tripod ≥ There are tripod mounting holes that are compatible with 1/4-20UNC and 3/8-16UNC screws. Use the size that matches the diameter of the tripod's fixing screw. - 14 -