Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 62

≥ It is not possible to adjust the gain value using the GAIN switch and jog dial in the following situations: j During Freeze Frame (l 81) ≥ If the gain value is increased, the noise on the screen increases. ≥ In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust the gain. (l 59, 63) ∫ Changing the maximum possible gain value for Auto Gain Mode Select the menu. MENU : [AUTO SW] # [AGC LIMIT] # desired setting (When [GAIN/ISO DISPLAY CHG] is set to [GAIN]) [3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB] (When [GAIN/ISO DISPLAY CHG] is set to [ISO]) [ISO1000]/[ISO2000]/[ISO4000]/[ISO8000] Super Gain You can use Super Gain by registering [SUPER GAIN] to a USER button. Super Gain allows you to set a Super Gain value. [GAIN/ISO DISPLAY CHG] (l 173) setting [GAIN] Gain value in Super Gain [30 dB] or [36 dB] [ISO] [ISO16000] or [ISO32000] Please refer to page 74 for details about setting the USER button. ≥ Switch to Manual Mode. (l 36) Press the USER button to which [SUPER GAIN] is registered or touch the applicable USER button icon. ≥ To cancel Super gain, press the USER button or touch the USER button icon again. ∫ To change the gain value of Super Gain Select the menu. MENU : [SW SETUP] # [SUPER GAIN] # desired setting (When [GAIN/ISO DISPLAY CHG] is set to [GAIN]) [30 dB]/[36 dB] (When [GAIN/ISO DISPLAY CHG] is set to [ISO]) [ISO16000]/[ISO32000] ≥ Super Gain is not available in the following cases: j In Auto Gain Mode j During Freeze Frame (l 81) j In High-sensitivity Recording Mode (l 148) - 62 -