Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 141

System mode All default settings are indicated with underlined text. MENU : [SYSTEM MODE] # desired setting [SYSTEM FREQ] Set the system frequency of this unit. [59.94Hz]: System frequency for regions where the TV broadcasting system is NTSC [50.00Hz]: System frequency for regions where the TV broadcasting system is PAL ≥ After you have changed the system frequency, this unit will be restarted automatically. ≥ By default, the system frequency is set to the broadcasting system of the region where this product was purchased. AG-DVX200PJ/PB/PX: This function's default setting is [59.94Hz]. AG-DVX200EJ/EN/ED: This function's default setting is [50.00Hz]. ≥ When recording with [REC MODE] set to [AVCHD], you cannot record scenes of different system frequencies into a single SD card. Use a different SD card for each system frequency. [OUTPUT BITS] [4:2:2(10bit)]/[4:2:2(8bit)] You can change the picture quality of images to be output to an external device according to the recording method used. (l 31) [REC MODE] Switch the recording mode of the motion pictures to record. ≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. [MOV]*: This recording method is suitable for editing images. Motion pictures will be saved in MOV format. [MP4]*: This recording method is suitable for editing images. Motion pictures will be saved in MP4 format. [AVCHD]: This recording method is suitable for playback on a high-definition compatible external monitor. * It is not compatible with motion pictures recorded in AVCHD. ≥ This function is not available in the following cases: j When [OUTPUT BITS] is set to [4:2:2(10bit)] j In Variable Frame Rate Mode (l 91) j During the Interval Recording (l 162) j During Freeze Frame (l 81) - 141 -