Panasonic AG-DVX200 Operating Instructions - Volume 2 - Page 52

Focus Transition You can use Focus Transition by registering "Focus Transition" to a USER button. With Focus Transition, you can shift the current focus position to a pre-registered focus position. ≥ Please refer to page 74 for details about setting the USER button. Registering a focus position To use Focus Transition, you need to register a focus position. ≥ You can register up to 3 focus positions. ≥ Switch to Manual Focus Mode. (l 44) 1 Select the menu. MENU : [RECORD SETUP] # [FOCUS TRANSITION] # [SET] 2 Touch the item to which you want to register the focus position. [1]/[2]/[3] ≥ You can select the item by pressing the USER buttons 1-3. ≥ The Focus Assist screen will be displayed. ≥ The screen may not be magnified depending on your settings. 3 Adjust the focus by rotating the focus ring. 4 Touch [ENTER]. ≥ The icon of the item to which the focus position has been registered will be highlighted in yellow. ≥ To select a different item, perform the operations in Steps 2s4. 5 Touch [EXIT] to complete the setting. ≥ The focus positions of the items you have set will be registered. ≥ This function is not available in the following cases: j When Auto Focus is used j During Freeze Frame (l 81) j In Variable Frame Rate Mode (l 91) ≥ The focus position settings are canceled in the following cases: j If you turn the unit off j If you press the THUMBNAIL button j If you operate the zoom - 52 -