Ricoh 3245 User Instructions - Page 39

Scan Settings Manual Image Density Mixing Scan Settings for a A Make sure that [Auto Image Den- Multiple Page Original sity] is not selected. If it has been selected, press [Auto Image When sending an original of several Density] to turn it off. pages, you can select a different im- B Press [iLighter] or [Darkerj] to adjust the density. age density, resolution, and original type setting for each page. 2 The square moves. Place the original, select the scan settings for the first page, dial, and then press the {Start} key as you would normally. Then follow one of the fol- lowing two procedures. Note ❒ It is recommended that originals be placed on the exposure glass when mixing scan settings for a multiple page original. Combined Auto and Manual Image Density A Select the [Auto Image Density]. B Press [iLighter] or [Darkerj] to adjust the density. The square moves. When placing originals on the exposure glass Note ❒ While the machine is beeping, you have about 60 seconds (10 seconds for Immediate Transmission) to select density, resolution, and original type. The remaining time is shown on the display. A Check which pages you want to scan with different settings. B Remove the previous page and place the next page. C Select the image density, resolu- tion, and original type. 31