Ricoh 3300D Network Guide - Page 109
Message List, System Log Information
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Message List Message List This is a list of messages that appear in the machine's system log. The system log can be viewed using the "syslog" command. System Log Information 2 Use the following command to display the system log information: • UNIX: Use the "syslog" command and "rsh", "rcp", and "ftp" parameters. • telnet : Use the "syslog" command. Message Problem and solutions Access to NetWare server denied. Either there is no account for this print server on the NetWare server or the password was incorrect. (In the print server mode) Login to the file server failed. Make sure that the print server is registered on the file server. If a password is specified for the print server, delete it. account is unavailable: Same account name be used. User account is disabled. This could be because it use the same account name as the administrator account. account is unavailable: The authentication password is not set up. User account is disabled. This could be because the authentication password is not set, and only the encryption account is set. account is unavailable: encryption is impossible. Encryption is not possible and account is disabled. This could be because: • Security option is not installed. • Encryption password has not been specified. add_sess: bad trap community The IP address (0.0.0.0.) is unavailable when the community access type is TRAP. Specify the host IP address for the TRAP destination. add_sess: community al- The same community name already exists. ready defined. Use another community name. add_sess_ipx: bad trapcommunity The IPX address (00:00:00:00:00:00) is unavailable when the community access type is TRAP. Specify the host IPX address for the TRAP destination. add_sess_ipx: community already defined. The same community name already exists. Use another community name. Attach FileServer= Connection to the file server as the nearest server has been established. Attach to print queue (In the print server mode) Attached to the print queue. btd is disabled. Communication via Bluetooth is unavailable because btd is disabled in the security mode. Enable the btd in the security mode. 101