Ricoh 3300D Network Guide - Page 71
dns, msh> dns 1 server 192.168.15.16
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Remote Maintenance by telnet ❖ Specifying the number of concurrent connections msh> diprint con {multi | single} • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. • The default is "multi". 2 dns Use the "dns" command to configure or display DNS (Domain Name System) settings. ❖ View settings The following command displays current DNS settings: msh> dns ❖ DNS server configuration The following command enables or disables the IP DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 • You can register up to three IP DNS server numbers. • You cannot use "255.255.255.255" as the DNS server address. ❖ Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11b interface ❖ Specifying the record overlap operation msh> dns overlap {update|add} • You can specify operations performed when records overlap. • update To delete old records and register new records. • add To add new records and store the old records. • When CNAME overlaps, it is always changed, irrespective of settings. 63