Ricoh 3300D Network Guide - Page 87
spoolsw, ssdp, View settings, Job Spool setting, Resetting Job spool setting, Protocol configuration
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Maintenance by telnet spoolsw Use the "spoolsw" command to view and configure Job Spool settings. You can only specify diprint, ipp, ftp, and smb(TCP/IP) protocol. • The "spoolsw" command for configuring Job Spool settings is available only when the optional hard disk is installed. ❖ View settings 2 The Job Spool setting appears. msh> spoolsw ❖ Job Spool setting msh> spoolsw spool {on|off} Note ❒ Specify "on" to enable Job Spool, or "off" to disable it. ❖ Resetting Job spool setting msh> spoolsw clear job {on|off} • When the printer power is cut during job spooling, this determines whether to reprint the spooled job. ❖ Protocol configuration msh> spoolsw diprint {on|off} msh> spoolsw ipp {on|off} msh> spoolsw smb {on|off} msh> spoolsw ftp {on|off} • You can specify the settings for diprint, ipp, ftp, and smb. ssdp Use the "ssdp" command to view and configure SSDP settings. ❖ View settings msh> ssdp ❖ Setting effective time msh> ssdp profile {1801-86400} The default is 10800 seconds. ❖ Advertise packet TTL settings msh> ssdp ttl {1-255} The default is 4. 79