Ricoh 3300D Network Guide - Page 36
Setting Up as a Remote Printer (NetWare 4.x
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using a Printer Server ❖ To quit CAREE: unload pserver ❖ To start 1 CAREE: load pserver print_server_name Note ❒ If the printer works as configured, the message "Waiting for job" appears. Setting up using NIB Setup Tool A Log on to the file server as a supervisor or supervisor equivalent. B Start NIB Setup Tool from the [Start] menu. C Click [Property Sheet], and then click [OK]. D Select the printer you want to configure, and then click [Finish]. A dialog box prompting you to perform the remaining configuration tasks in the Web browser appears. Click [OK], and then wait until Web Image Monitor starts automatically. E A dialog box for entering the [User Name] and [Password] appears. Enter the user name and password, and then click [OK]. For details about the login user name and password, consult your network administrator. F Click [Configuration] in the left area, click [Network], and then click [NetWare]. G Confirm the settings, and then click [Apply]. Configuration is now complete. Wait several minutes before restarting Web Image Monitor. H Click [Logout]. Reference For details, see p.22 "Setting Up as a Print Server (NetWare 3.x)" Setting Up as a Remote Printer (NetWare 4.x, 5 / 5.1, 6 / 6.5) Follow the procedure below to use the printer as a remote printer under NetWare 4.x, 5 / 5.1 and 6 / 6.5. Important ❒ To use the printer as a remote printer under NetWare 4.x, 5 / 5.1, 6 / 6.5, set it to NDS mode. ❒ Do not use the printer as a remote printer when Pure IP is used. 28