Ricoh 3300D Network Guide - Page 80
set, msh> set protocol
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Monitoring and Configuring the Printer ❖ Adding IP Routing Table msh> route add {host|net} "destination" "gateway" • Adds a host or network route to "destination", and a gateway address to "gateway" in the table. • Specify the IP address to destination and gateway. • Host becomes the default setting. 2 ❖ Setting the Default IP Gateway msh> route add default "gateway" ❖ Deleting specified IP destination from Routing Table msh> route delete {host|net} "destination" • Host becomes the default setting. • IP address of destination can be specified. ❖ Route initialization msh> route flush Note ❒ The maximum number of routing tables is 16. ❒ Set a gateway address when communicating with devices on an external network. ❒ The same gateway address is shared by all interfaces. set Use the "set" command to set the protocol information display "active" or "inactive". ❖ View settings The following command displays protocol information (active/inactive). msh> set tcpip msh> set appletalk msh> set netware msh> set smb msh> set protocol • When protocol is specified, information about TCP/IP, AppleTalk, Netware, SCSI print, and SMB appears. msh> set ftp msh> set rsh msh> set diprint msh> set web 72 msh> set snmp