Ricoh 3300D Network Guide - Page 29
Using NetWare, Setting procedure, Using SmartDeviceMonitor for Admin
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Using NetWare Using NetWare This section describes the setting procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the machine as a "print server" or "remote printer". 1 Important ❒ IPv6 cannot be used on this function. ❖ Setting procedure • When using the machine as a print server A Installing SmartDeviceMonitor for Admin B Setting the network interface board. C Turning the machine off and then back on. • When using the machine as a remote printer A Installing SmartDeviceMonitor for Admin. B Setting the network interface board. C Setting NetWare. D Starting the print server. Note ❒ This procedure assumes an environment is already prepared for normal Net- Ware running the printing service setting. ❒ The procedure is explained with the following example settings: • File server's name ...CAREE • Print server's name ...PSERV • Printer's name ...R-PRN • Queue name ...R-QUEUE ❖ Using SmartDeviceMonitor for Admin To use the machine in a NetWare environment, use SmartDeviceMonitor for Admin to set the NetWare printing environment. Note ❒ The NetWare Client provided by Novell is required to set the printing en- vironment using SmartDeviceMonitor for Admin under the following environments: • NDS mode in Windows 95/98/Me • NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0 Reference For details about installing SmartDeviceMonitor for Admin, see p.39 "Installing SmartDeviceMonitor for Admin" 21