Ricoh 3300D Network Guide - Page 54
Checking the Machine Status, Start SmartDeviceMonitor for Admin.
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Monitoring and Configuring the Printer D On the [Tools] menu, click [NIB Setup Tool]. A Web browser opens and the dialog box for entering the login user name and password for the Web Image Monitor administrator appears. NIB Setup Tool starts when the network interface board is default. Follow the instructions on the screen. 2 E Enter the login user name and password, and then click [Login]. For details about the user name and password, consult your network admin- istrator. Top Page of Web Image Monitor appears. F Click [Configuration]. G Click [Program / Change Administrator] on the [Device Settings] area, and then change the settings. H Click [Change]. I On the [New Password], enter a password. Enter the same password in [Confirm Password] . J Click [OK]. K Click [Apply]. L Quit Web Image Monitor. M Quit SmartDeviceMonitor for Admin. Checking the Machine Status Follow the procedure below to check machine status. A Start SmartDeviceMonitor for Admin. B On the [Group:] menu, point to [Search Device], and then click [TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3]. A list of machines using the selected protocol appears. Select the protocol of the machine whose configuration you want to change. If you are using TCP/IP SNMP v3, enter the user authentication. C To obtain status details, select the machine in the list, and then click [Open] on the [Device] menu. The machine status appears in the dialog box. D Click [System] or [Printer]. The machine status appears in the dialog box. 46