Ricoh 3300D Network Guide - Page 82
show, slp, smb, msh> smb comp computer name
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Monitoring and Configuring the Printer show Use the "show" command to display network interface board configuration settings. ❖ View settings msh> show 2 • If "-p" is added, you can view settings one by one. Reference p.95 "Configuring the Network Interface Board" slp Use "slp" command to view and configure SLP settings. msh> slp ttl "ttl_val" • You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1. Using the "slp" command, you can configure the value of TTL which can be used by SLP multicast packet. • The default value of TTL is 1. A search is executed only within a local segment. If the router does not support multicast, the settings are not available even if the TTL value is increased. • The acceptable TTL value is between 1 and 255. smb Use the "smb" command to configure or delete the computer or workgroup name for SMB. ❖ Computer Name settings msh> smb comp "computer name" • Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be entered. ❖ Working Group Name settings msh> smb group "work group name" • Set workgroup name using up to 15 characters ❖ Comment settings msh> smb comment "comment" • Set comment using up to 31 characters. ❖ Notify print job completion msh> smb notif {on | off} 74 • To notify print job completion, specify "on". Otherwise, specify "off"