Ricoh 3300D Network Guide - Page 69
devicename, dhcp, Interface priority configuration
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remote Maintenance by telnet devicename Use the "devicename" command to display and change the printer name. ❖ View settings msh> devicename ❖ Printer name configuration 2 msh> devicename name "string" • Enter a printer name using up to 31 alphanumeric characters. • Set single names for each printer. ❖ Printer name initialization msh> devicename clear name • Reset the printer name to its default. dhcp Use the "dhcp" command to configure DHCP settings. ❖ View settings The following command displays the current DHCP settings. msh> dhcp ❖ Configuration You can configure DHCP. msh> dhcp "interface_name" {on|off} • Click {on} to enable dhcp. Click {off} to disable DHCP. • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}. • wlan can be specified only when the IEEE 802.11 interface is installed. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11 interface ❖ Current interface priority configuration display msh> dhcp priority ❖ Interface priority configuration msh> dhcp priority "interface_name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. 61