Ricoh 3300D Network Guide - Page 110
Connected DHCP Server<DHCP serverad, Change IP address from DHCP Server.
UPC - 026649062278
View all Ricoh 3300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Monitoring and Configuring the Printer 2 102 Message Problem and solutions centrod is disabled. Communication via parallel connection is unavailable because centrod is disabled in the security mode. Enable centrod in the security mode. Cannot create service connection (In the remote printer mode) Connection to the file server has not been established. The number of file server users may have exceeded the maximum capacity of the file server. Cannot find rprinter (/) The printer with the number displayed on the print server does not exist. Make sure that the printer number is registered on the print server. Change IP address from DHCP Server. The IP address changes when DHCP lease is renewed. To always assign the same IP address, set a static IP address to the DHCP server. child process exec error! (process name) The network service failed to start. Turn the printer off and then on. If this does not work, contact your service or sales representative. Connected DHCP Server(). the DHCP server. connection from Login was from the host IP address. Could not attach to FileServer (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server configuration. Could not attach to PServer (In the remote printermode) Connection to the print server has not been established. The print server has refused the connection. Check the print server configuration. Current Interface Speed:xxxMbps Speed of the network (10Mbps, 100 Mbps, or 1Gbps). Current IP address Current IPv4 address. Current IPX address Current IPX address DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start. The DHCPCD service (dhcp client service) has started. dpsd is disabled. Communication via PictBridge is unavailable because PictBridge is disabled in the security mode. Enable PictBridge in the security mode. Duplicate IP=(from). The same IP address was used. Each IP address must be unique. Check the address of the device indicated in [MAC address].