Ricoh AC205 Service Manual - Page 109
Uneven Density, Background
View all Ricoh AC205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
PRINTING QUALITY PROBLEMS 4.5.7 UNEVEN DENSITY Description: Print density is uneven between the left and right sides of the output print. Troubleshooting Cause Solution B273T920.WMF 1. Pressure force on the left and right 1. Replace both the left and right bushings springs of the transfer roller is not even, and spring assemblies. springs are damaged, transfer roller is not correctly installed, or transfer roller 2. Replace the toner cartridge. bushings or holders are damaged. 3. Gently shake the toner cartridge side to 2. Toner cartridge has reached end of life. side 5-6 times and attempt to print again. Replace the toner cartridge if the 3. Toner inside the cartridge is not level due problem persists. to damaged blade or low toner. 4.5.8 BACKGROUND Description: Light background is visible throughout the output print. Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer Cause 1. The machine has not printed large quantities of low coverage pages, or the machine has not been used for an extended period. 2. A recycled toner cartridge is being used. 3. The toner cartridge has reached end of life. 4. The up/down movement of the transfer roller is not smooth. 5. HVPS is not performing within specification. Solution B273T921.WMF 1. The toner cartridge is designed to print 3,000 sheets with 5% coverage. Background can appear if the machine prints more than 3,600 pages with only 2% coverage. 2. Machine operation is not guaranteed with use of recycled toner cartridges. Gently shake the toner cartridge side to side 5-6 times and attempt to print again. Replace the toner cartridge if the problem persists. 3. Replace the toner cartridge. 4. Clean the transfer roller bushings. 5. Clean the high-voltage charge terminals. Replace the HVPS if the problem persists. SM 4-23 B273