Ricoh AC205 Service Manual - Page 98

Paper Feed Problems, Incorrect Print Position, Jam 0, 3.2 Jam 0

Get Ricoh AC205 PDF manuals and user guides View all Ricoh AC205 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

PAPER FEED PROBLEMS 4.3 PAPER FEED PROBLEMS 4.3.1 INCORRECT PRINT POSITION Description: The print job begins despite the paper being in the incorrect position in the paper cassette. Cause Solution Defective feed sensor actuator Replace the defective actuator 4.3.2 JAM 0 Description: • Paper does not exit from the cassette. • Jam 0 appears when the paper feeds into the printer. L T P FSeenesdor MP Sensor Cause Solution B273T07.WMF 1. Defective solenoid. Check the solenoid in Tech Mode. 2. Cassette/By-pass knock-up plate and springs are misaligned or defective. 3. Paper separator pad is dirty or defective. 1. Replace the solenoid. 2. Repair/replace as required. 3. Clean with a soft cloth dampened with isopropyl alcohol or water. Replace if necessary. 4. Pick-up roller may be contaminated or not 4. Clean with a soft cloth dampened with installed correctly. isopropyl alcohol or water. Replace if 5. The area between the pick-up roller and necessary. registration sensor may be contaminated. 5. Ensure all rollers are clean. 6. Feed sensor may be defective. Check in Tech Mode. 6. Check the SMPS PBA, Main PBA, and all connectors. Replace any faulty components. B273 4-12 SM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
PAPER FEED PROBLEMS
B273
4-12
SM
4.3 PAPER FEED PROBLEMS
4.3.1 INCORRECT PRINT POSITION
Description:
The print job begins despite the paper being in the incorrect position
in the paper cassette.
Cause
Solution
Defective feed sensor actuator
Replace the defective actuator
4.3.2 JAM 0
Description:
•
Paper does not exit from the cassette.
•
Jam 0 appears when the paper feeds
into the printer.
Cause
Solution
1.
Defective solenoid. Check the solenoid in
Tech Mode.
2.
Cassette/By-pass knock-up plate and
springs are misaligned or defective.
3.
Paper separator pad is dirty or defective.
4.
Pick-up roller may be contaminated or not
installed correctly.
5.
The area between the pick-up roller and
registration sensor may be contaminated.
6.
Feed sensor may be defective. Check in
Tech Mode.
1.
Replace the solenoid.
2.
Repair/replace as required.
3.
Clean with a soft cloth dampened with
isopropyl alcohol or water. Replace if
necessary.
4.
Clean with a soft cloth dampened with
isopropyl alcohol or water. Replace if
necessary.
5.
Ensure all rollers are clean.
6.
Check the SMPS PBA, Main PBA, and all
connectors. Replace any faulty
components.
P
T
L
Feed
Senso
r
MP
Senso
r
B273T07.WMF