Ricoh AC205 Service Manual - Page 121

ERROR MESSAGES, The Stop/Copy button was

Page 121 highlights

ERROR MESSAGES Error Priority fax function full Incompatible Jam1 or No cartridge Line busy Load document Scanner locked Stop pressed Toner empty replace toner Retry redial Description The priority fax job queue is full. The remote machine does not have the requested feature, such as sending a color fax. This message can also show if the remote machine does not have enough memory to complete the job. Paper is jammed in the paper exit area, or the toner cartridge is not installed. The receiving machine does not answer, or the line is busy. An attempt has been made to set up a copy/fax job, but no document is loaded in the ADF. The scanner module is locked. The Stop/Copy button was pressed during a copy/fax job. The toner cartridge has run out and the machine stops printing. The machine is waiting for a specified timer interval to dial a previously busy station again. Solution Cancel unnecessary priority fax jobs. Reconfirm the features of the remote machine. Clear the jam. Install the toner cartridge. Try again later. Load the document in the ADF and try again. Unlock the scanner and press Stop/Clear. Try again. Replace the toner cartridge. Press to immediately redial, or press Stop/Clear to cancel the redial operation. Troubleshooting SM 4-35 B273

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

ERROR MESSAGES
SM
4-35
B273
Trouble-
shooting
Error
Description
Solution
Priority fax function full
The priority fax job queue is full.
Cancel unnecessary priority
fax jobs.
Incompatible
The remote machine does not
have the requested feature, such
as sending a color fax.
This message can also show if
the remote machine does not
have enough memory to
complete the job.
Reconfirm the features of
the remote machine.
Jam1 or No cartridge
Paper is jammed in the paper
exit area, or the toner cartridge is
not installed.
Clear the jam.
Install the toner cartridge.
Line busy
The receiving machine does not
answer, or the line is busy.
Try again later.
Load document
An attempt has been made to set
up a copy/fax job, but no
document is loaded in the ADF.
Load the document in the
ADF and try again.
Scanner locked
The scanner module is locked.
Unlock the scanner and
press Stop/Clear.
Stop pressed
The Stop/Copy button was
pressed during a copy/fax job.
Try again.
Toner empty replace toner
The toner cartridge has run out
and the machine stops printing.
Replace the toner cartridge.
Retry redial
The machine is waiting for a
specified timer interval to dial a
previously busy station again.
Press <Enter> to
immediately redial, or press
Stop/Clear to cancel the
redial operation.