Ricoh Aficio MP 5000B General Settings Guide - Page 111
Edit, Back Margin: Left / Right
View all Ricoh Aficio MP 5000B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Edit Edit This section describes the user tools in the Edit menu under Copier / Document Server Features. Default settings are shown in bold type. Enter the width of the binding margin with the number keys as follows: • Metric version: 0-30 mm (in increments of 1 mm) • Inch version: 0"-1.2" (in increments of 0.1 inch) Enter the width of the erased margin with the number keys as follows: 3 • Metric version: 2-99 mm (in increments of 1 mm) • Inch version: 0.1"-3.9" (in increments of 0.1 inch) An image of approximately 1.5 mm (0.06") will not be displayed as the width of the separation line, when specifying solid or broken lines. Front Margin: Left / Right Specify left and right margins on the front side of copies in Margin Adjustment mode. The default setting is Left 5 mm (Metric version) / Left 0.2" (Inch version). Back Margin: Left / Right Specify left and right margins on the back side of copies in Margin Adjustment mode. The default setting is Right 5 mm (Metric version) / Right 0.2" (Inch version). Front Margin: Top / Bottom Specify top and bottom margins on the front side of copies in Margin Adjustment mode. The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version). Back Margin: Top/Bottom Specify top and bottom margins on the back side of copies in Margin Adjustment mode. The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version). 1 Sided 2 Sided Auto Margin: TtoT In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side. The margin is set to the same value of "Back Margin: Left/Right". The default setting is Right 5 mm (Metric version) / Right 0.2" (Inch version). 1 Sided 2 Sided Auto Margin: TtoB In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side. The value set for "Back Margin: Top/Bottom" is used. The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version). 109