Ricoh Aficio MP 5000B General Settings Guide - Page 20
Connect the other end of the Ethernet interface cable to a network connection device such
View all Ricoh Aficio MP 5000B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. Connecting the Machine 1. Attach the ferrite core supplied with the machine to the machine end of the Ethernet interface cable. Make a loop about 10 cm (4 inch) (1) from the end and attach the ferrite core supplied with the optional Gigabit Ethernet board. 1 BBP010S 2. Make sure the main power switch of the machine is off. 3. Connect the Ethernet interface cable to the Gigabit Ethernet port. BBM016S 4. Connect the other end of the Ethernet interface cable to a network connection device such as a hub. 5. Turn on the main power switch of the machine. BBM017S 1. Indicator (yellow) When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned off. 2. Indicator (green) When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating it is turned off. 3. Indicators (both yellow and green) 18