Samsung CLX-3305FW User Manual Ver.1.0 (English) - Page 205

System setup Item Wakeup Event System Timeout Job Timeout Altitude Adj. Humidity Description You can set the condition to wake up from power-save mode. • On: The machine wake up from the power save mode on the following cases: - Pressing any button - Opening or closing the paper tray - Inserting paper in the document feeder • Off: The machine wake up from the power save mode only when the Power/Wakeup button is pressed. Sets the time that the machine remembers previously used copy settings. After the timeout, the machine restores the default copy settings. Sets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. Optimize print quality according to the machine's altitude. Optimizes print quality according to the humidity in the environment. Item Auto Continue Paper Substit. PrintBlankPage Description Determine whether or not the machine continues printing when it detects the paper does not match the paper settings. • 30 Sec: If a paper mismatch occurs, an error message will display. The machine waits for about 30 second, then automatically clear the message and continue printing. • 0 Sec: Even though a paper mismatch occurs, the machine continues printing. • Off: If a paper mismatch occurs, the machine waits until you insert the correct paper. Automatically substitutes the printer driver's paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa. The printer detects the printing data from computer whether a page is empty or not. You can set to print or skip the blank page. 3. Useful Setting Menus 205