Thermador CIS365GB User Manual - Page 14
Operation
View all Thermador CIS365GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
āOperation Programming the cooktop Switching the cooktop on and off To switch on To switch off Indicators Adjusting the element This section will show you how to adjust the elements. The table contains details on the heat settings and appropriate cooking times for a variety of dishes. Connecting and disconnecting the cooktop using the main ON/OFF switch. Press the ON/OFF symbol. A beep will sound. The " indicator located on top of the ON/OFF symbol will appear. Press the ON/OFF symbol. The " indicator will go out. The cooktop is switched off. The residual heat warning light stays on until the elements have cooled down completely. The cooktop switches off automatically when all the elements have been switched off for more than 20 seconds. The residual heat indicator remains lit until the elements have cooled down sufficiently t/s. The required heat setting can be adjusted using the programming zone. Heat setting 1 = minimum Heat setting 9 = maximum Each heat setting has an intermediate step. This is shown by the .5 indicator (e.g. 1.5). Adjusting the heat setting: The cooktop must be switched on. 1. Press the O symbol on the desired element. The corresponding indicator _ lights up. 2. Select the desired element using the 1 to 9 symbols or using the + and symbols. 15