Thermador CIS365GB User Manual - Page 24
programming, function
View all Thermador CIS365GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Time programming function d Switching an element off automatically It is programmed as follows This function may be used in two different ways: - to switch an element off automatically - as a timer WARNING: The timer should not be used as a safety measure in order to leave the cooktop unsupervised during use, especially at high temperatures. Breaded items can smoke. Overheated food and oil can catch on fire. Supervise the cooktop even if the time program is on. Enter the time period for the required element. The element will switch off automatically once this time has elapsed. The cooktop must be switched on. 1. Select the element and heat setting required. Then press the TIMER symbol. The kk and Min indicators light up on the time programming function display. The 0 indicator lights up on the selected element. 2. Program time using the 0 to 9 symbols or using the + and - symbols. The basic settings are displayed. + symbol: 30 minutes - symbol: 10 minutes Once the time has elapsed Correcting the time Cancelling the automatic OFF function After a few seconds, the programmed time will start to count down. The last programmed cooking time will appear in the display. The element switches off once this time has elapsed. You will hear a beep. The indicators 0 and 0 blink on the element. The indicators switch off and the display beep turns off by pressing the Timer symbol. Select the element and then press the TIMER symbol. Change the cooking time using the 0 to 9 symbols or using the + and - symbols. Select the desired element press the TIMER symbol. Then press the 0 symbol until kk is displayed. The 0 indicator will go out. 25