Toshiba Qosmio G35-AV600 User Guide - Page 263
Sample Toshiba Recovery DVD RAID Menu, The following menu is displayed
View all Toshiba Qosmio G35-AV600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
263 Using the RAID-0 or RAID-1 Utility Creating a new RAID-0 array The following menu is displayed: Your machine supports Redundant Array of Independent Disks (RAID). Please select the RAID level. 1. Factory Default Setup the computer ready to support mirroring function. You can use RAID Utility to configure two hard disks to become mirror of each other, in which the same data is written on both hard disks. If one hard disk fails, the system can still run from the other hard disk. Before using RAID Utility, your second hard disk can still work as independent hard disk. Advance Setting (for Advance users only) 2. RAID-1 - Automatically configure two hard disks of your computer to become mirror after recovery process is completed. WARNING: You can not use the second hard disk for any other purpose until you use RAID Utility to end mirroring. 3. RAID-0 - Automatically configure computer to support striping function - data is broken into blocks and written to both hard disks simultaneously to increase the hard disk performance. WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST. Enter selection:" Sample Toshiba Recovery DVD RAID Menu Before configuring your system for RAID-0, make sure you back up all data on your computer's hard drives onto another storage media. When a RAID-0 array is created, all data on both your primary and secondary hard disks is erased and cannot be recovered. Toshiba is not responsible for any loss of data on your hard disks.