Toshiba Qosmio G35-AV600 User Guide - Page 278
Rebuilding the data on the secondary disk in a RAID-1 array
View all Toshiba Qosmio G35-AV600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
278 Using the RAID-0 or RAID-1 Utility Rebuilding the data on the secondary disk in a RAID-1 array Rebuilding the data on the secondary disk in a RAID-1 array If the secondary hard disk has been removed from the computer and you want to resume using the secondary hard disk for mirroring, you must reinsert the secondary hard disk drive into the computer. If Auto Rebuild has previously been enabled on the Options window of the TOSHIBA RAID Console, rebuilding will start when the secondary hard disk drive is reinserted into the computer. If Auto Rebuild has not previously been enabled: 1 Insert the secondary hard disk drive into the computer. 2 Plug in the AC adapter and power on the computer. (The computer must be running on power provided by the AC adapter to perform these steps.) When rebuilding the RAID-1 array, all existing data on the secondary hard disk will be permanently erased and cannot be recovered. Toshiba is not responsible for any loss of data on the hard disk. NOTE If a hard disk password has previously been assigned, the password entry window will display. You must enter the hard disk password to continue. 3 The message "Mirror is broken" displays. Click OK. 4 Start up the TOSHIBA RAID Console Utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console. 5 Click Mirroring.