Xerox 6180N FreeFlow® Print Server System Guide - Page 44
Administration controls, Tile Width, Tile Length, Tile Offsets, Tile Byte Counts
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Printing and queue management - The Print Server supports values of 1, 3, 6, and 8. Values of 2, 4, 5, and 7 are treated as if they were 1, 3, 6, and 8 respectively. Photometric Interpretation - Default = none; value must be supplied. - The Print Server supports bi-level values of 0 and 1 only. Resolution Units - Default = 2 - The Print Server supports values of 2 (inches) and 3 (centimeters) Rows Per Strip - Default = none - The Print Server supports single and multiple strip images. NOTE: Strips and tiles cannot be intermixed within the same TIFF file. Strip Byte Counts and Strip Offsets - Default = none; values must be supplied if the image data is organized into strips. - The Print Server supports single and multiple strip images. X and Y Resolution - Default = none - Values must be supplied for printing. Tile Width, Tile Length, Tile Offsets, Tile Byte Counts - Default = none - Values must be supplied if image data is organized into tiles. Administration page controls The Print Server permits the user to enable or disable the printing of Administration/Banner pages on a queue or job basis. This allows the site to control when and how the banner and error pages are printed. The default setting by queue is set to enabled. The behaviors of the banner and error pages follow Print Server precedence, that is overrides, job level and so forth. 3-10 System Guide