Xerox 6180N FreeFlow® Print Server System Guide - Page 60
PCL paper source command, Tray programming, Tray confirmation
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Finishing PCL paper source command Use the PCL Paper Source command to program a PCL print job to use a specific paper. The PCL decomposer on the Xerox FreeFlow Print Server Controller reads the paper source command and, using the PCL Paper Sources option in the Queue Properties and maps the command to the appropriate paper. The number code corresponds to the following PCL Paper Source programmed in Queue Properties. To program the PCL Paper Source, use the following guidelines: Standard: &11H Manual Paper Feed: &13H Manual Envelope Feed: &13H Lower: &14H Large Capacity: &15H Envelope Feed: &16H Tray programming Tray confirmation Tray confirmation selections control: • whether a confirmation pop-up window appears on the screen after a tray has been opened and closed • what attributes are assigned to that tray • whether the action is automatic or requires user action to confirm the programming change To set tray programming options, perform the following: 1. On the main menu select [Setup] 2. Select [System Preferences] 3. Select the [Stocks and Trays] tab Settings are system-wide and are applied immediately. No restart of the Xerox FreeFlow Print Server software required. 4-4 System Guide