Xerox 6180N FreeFlow® Print Server System Guide - Page 76
SMB/FTP or SAMBA/FTP network filing configuration, Network Filing via SMB/SAMBA or FTP/SFTP
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Gateway and Network Configuration SMB/FTP or SAMBA/FTP network filing configuration In Network Configuration, the SMB/FTP or SAMBA/FTP tab allows the administrator to enable or disable filing using one of three different technologies: 1. SMB or SAMBA, the protocol behind WINS. 2. FTP, File Transfer Protocol. 3. SFTP, Secure File Transfer Protocol with encryption. NOTE: If SMB or SAMBA is selected, the administrator must enable WINS and specify a NetBIOS name. Network Filing via SMB/SAMBA or FTP/SFTP The System Administrator can program the SMB/SAMBA or FTP/ SFTP Server Login information that is required to gain network file access. If this information was not programmed by the System Administrator, perform the following: 1. If required, enter your User Name and Password. 2. Type the Domain Name or Select [Browse] to locate the Domain Name and then select [OK]. 3. Type the Server Name or Select [Browse] to locate the Server Name and then select [OK]. 4. If required, type the Share Path or Select [Browse] to locate the Share Path and then select [OK]. 5. After entering all the required information, select [OK] to close the Save Location dialog window. • The Network Validation dialog opens if it takes longer than two seconds to validate the network connection information. • Select [OK] if validation is successful. If validation is not successful, follow the displayed instructions or contact the System Administrator. 5-12 System Guide