Yamaha CL3 Owner's Manual - Page 32
Connecting to I/O racks, About Dante Controller, Daisy chain network - software
View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
EF 01 EF 01 EF012 EF012 Connections About Dante Controller Dante Controller is a software application that allows configuration and audio routing of Dante networks. Use this application if you plan to connect or set up Dante-enabled devices (such as Dante-MY16-AUD) that do not feature CL native support, or if you wish to set up complicated signal routings on a Dante network. More information is posted on the following website. http://www.yamahaproaudio.com/ To run Dante Controller, a computer must feature a GbE-compatible Ethernet connector. Refer to the Dante Controller owner's manual for details on Dante Controller. Connecting to I/O racks This section explains how to connect the CL series to I/O racks (such as Rio3224-D) in a daisy chain network and in a star network (redundant network). Daisy chain network 1. Before making any connections, turn on the power to the CL unit, press the SETUP button, press the DANTE SETUP button, and then select DAISY CHAIN in the DANTE SETUP screen. 2. Turn off the power to the CL unit. 3. Use the Dante connectors on the CL series and I/O racks to connect them as follows: 4. Set the rotary switches and DIP switches on the I/O racks as shown below. (ID#1) 789A 3456 BCD ON 1 2 3 4 5 6 7 8 (ID#2) 789A 3456 BCD ON 1 2 3 4 5 6 7 8 5. Turn on the power to the CL series and the I/O rack units. 6. Press the RACK button in the display screen. 7. Press the I/O RACK tab. 8. Press the DANTE INPUT PATCH button. 9. Press the AUTO SETUP button in the upper right of the screen. CL5 789A 23456 BCD PRIMARY Rio3224-D (ID#1) SECONDARY 23456 BCD 789A PRIMARY Rio3224-D (ID#2) 32 Owner's Manual The AUTO SETUP button enables you to automatically patch the devices in ascending order of unit ID number, according to the settings of the currently-connected I/O racks. 10. When a confirmation message appears, press the OK button.