Yamaha CL3 Owner's Manual - Page 55

Specifications Specifications General specifications Sampling Frequency Signal Delay Fader Frequency Response Total Harmonic Distortion*4 Hum&Noise*5 Dynamic Range Crosstalk@1kHz Dimensions (W x H x D) and Net Weight Power Requirements (wattage) Power Requirements (voltage and hertz) Temperature Range Included Accessories Optional Accessories Internal 44.1kHz 48kHz External 44.1kHz +4.1667%, +0.1%, -0.1%, -4.0% 48kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm ±200ppm Less than 2.5ms, OMNI IN to OMNI OUT, Fs= 48kHz 100mm motorized, Resolution=1024steps, +10dB to -138dB, -∞dB all faders +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain= Min. -128dBu typ., Equivalent Input Noise, Input Gain= Max., -88dBu, Residual output noise, ST master off 112dB typ., DA Converter, 108dB typ., OMNI IN to OMNI OUT, Input Gain= Min. -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain= Min. CL5: 1053mm x 299mm x 667mm, 36kg CL3: 839mm x 299mm*2 x 667mm, 29kg*2 CL1: 648mm x 299mm*2 x 667mm, 24kg*2 CL5/CL3/CL1: 170W, Internal Power Supply CL5/CL3/CL1: 200W, Simultaneous use of Internal PSU and External PW800W US/Canada: 120V 60Hz Japan: 100V 50/60Hz China: 110-240V 50/60Hz Korea: 220V 60Hz Other: 110-240V 50/60Hz Operating temperature range: 0-40°C Storage temperature range: -20-60°C Owner's Manual, Dust Cover, Power Cord Meter Bridge MBCL (CL3/CL1 only), Mini-YGDAI cards*3, Gooseneck Lamp LA1L Power Supply PW800W, Power Supply Link Cable PSL360 *1. Crosstalk is measured with a 30dB/octave filter @22kHz *2. Excluded MBCL optional meter bridge. *3. Refer to the Yamaha pro audio website for information on supported cards. http://www.yamahaproaudio.com *4. Total Harmonic Distortion is measured with 18dB/octave filter @80kHz *5. Hum & Noise are measured with A-Weight filter. European Models Inrush Current based on EN 55103-1:2009 10A (on initial switch-on) 6A (after a supply interruption of 5s) Conforms to Environments: E1, E2, E3 and E4 Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Owner's Manual 55